FAST dual WB to EFI V1

[rickou812]

I have searched and followed the tutorials I have found, but I am having problems.

The Fast PID is shown as unsupported (grayed X out)
I have the EXternal outputs hooked up as shown and ran the check for supported PIDS, but they remain grayed out.

What is it that I am missing?

Thanks,
Rick

[mr.prick]

You need to have {EXT.AD1} & {EXT.AD2}
If they are then select the F.A.S.T PIDs even though they are not valid and start a log.
Sometimes a PID(s) will be crossed out before a log starts but
once logging starts they become valid. :nixweiss:

[rickou812]

You need to have {EXT.AD1} & {EXT.AD2}
If they are then select the F.A.S.T PIDs even though they are not valid and start a log.
Sometimes a PID(s) will be crossed out before a log starts but
once logging starts they become valid. :nixweiss:

Thanks Mr. Prick, I missed those 2 PIDS,I did have the other 4 selected.
SO just for future clarification and hopefully to help others a total of 6 PIDS must be selected for the FAST dual WB right?:
EXT.AD1
EXT.AD2
CALC.AFR_F1
CALC.AFR_F2
CALC.BEN_F1
CALC.BEN_F2

[mr.prick]

Yes.
Always have the {EXT.AD}s selected at the least
You can add the calc_pids that are based of them after the log is saved.