View Full Version : Is schematic in the DSP PDF wrong?
Dozerboy
November 20th, 2009, 12:14 PM
I was installing my DSP switch in my LBZ and the the pin locations on the schematic look to be wrong. On page 9 the DSP2 and the ground should be on the 2nd row of pins and DSP5 should be on the 3rd. The pic on page 21 seem to confirm this.
I just want to be sure before I fry something.
bballer182
November 20th, 2009, 03:17 PM
make sure you have the latest document dated like Sept. 14th and has a huge nice writeup of the installation. And as far as i can see everything looks correct.
Dozerboy
November 21st, 2009, 01:01 AM
Ya it hit me last night that I was looking as the back of the connector and the schematic is of the front.
bballer182
November 21st, 2009, 05:48 AM
ah yeah that'll getcha
killerbee
November 22nd, 2009, 03:44 AM
make sure you have the latest document dated like Sept. 14th and has a huge nice writeup of the installation. And as far as i can see everything looks correct.
My tutorial says Oct 3. Do you have something I don't?
bballer182
November 22nd, 2009, 05:53 AM
My tutorial says Oct 3. Do you have something I don't?
whoops, meant Oct. yeah that's the latest. :doh2:
8100 Power
November 25th, 2009, 10:48 AM
I noticed that myself. Which had me confused when installing mine. All is well now though.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.