PDA

View Full Version : Ben



L31Sleeper
November 21st, 2009, 03:15 PM
I don't see the Base Efficiency Numerator PID on the list for the LS1-B ??

ScarabEpic22
November 21st, 2009, 04:16 PM
Since its a CALC PID, what you need to do is click the little V7 button in the PID selection window and type BEN1 (for serial BEN factor) or whatever CALC.BENxxxxx you want. Omit the prefix CALC. though. Read the little blurb in there too, makes more sense.

L31Sleeper
November 21st, 2009, 04:35 PM
no idea what you are talking about

joecar
November 21st, 2009, 05:46 PM
See pic...

Calc pids are predefined for various things like the wideband analog BEN amd AFR pids...

You can also define you own calc pids in C:\Documents and Settings\Joe\My Documents\EFILive\V7.5\User Configuration\calc_pids.txt.

BBL logging normally can't log calc pids, until now... see pic.

L31Sleeper
November 21st, 2009, 07:11 PM
Joe I DO NOT have that button on my software.

I have a "configure switchable tunes" button in that same location. ??

mr.prick
November 21st, 2009, 07:17 PM
What version of the software do you have?

L31Sleeper
November 21st, 2009, 07:22 PM
Version 8.1.2 Build 58

mr.prick
November 21st, 2009, 07:57 PM
Current version is in my sig.
You will need to update the software to get the calc_pids to load up with BBL.

L31Sleeper
November 21st, 2009, 10:43 PM
this is what I found on the web site

June 09, 2009: EFILive V7.5.5 (Build 88)
June 09, 2009: EFILive V8.1.2 (Build 58)
June 09, 2009: FlashScan And Autocal Firmware (V2.06.12)

so where do you get the newer ones ??

GAMEOVER
November 22nd, 2009, 02:59 AM
Try this link:

http://forum.efilive.com/showthread.php?p=105679#post105679

joecar
November 22nd, 2009, 08:35 AM
Also, you need to update your V2 to bootblock 2.6.02 and firmware 2.06.16...

Please read this carefully before doing that... see attached.