New to efi live / wideband question

[Toby Van Horn]

I am picking up V1.2 EFI live, mostly for logging data, I want to learn a lot about the way my car runs ect, seems to have a good tune was done by a local guy that does a ton of vettes, here are my mods:


1999 corvette with a built LS1:
Forged lower end 9.5 compression Cartek stage II built heads / 921 springs / cam and a maggie blower with 10 lbs of boost.

I have a few questions:

How many things can be logged with 1.2?

how many additional things can be added (w.b. ect)

I plan on running a W.B., which setup is best for V1.2, I do not think I need a guage.

What other additions are good? Should I get a MAP to read boost better? Exhaust temps? ect.

Thanks in advance for any help

[mr.prick]

Page 109 of the scan tool manual: (http://download.efilive.com/Documentation/EFILiveV75Scan.pdf)

Logging external data using FlashScan V1
EFILive FlashScan interface is equipped with 3 separate inputs for capturing external data.
The 2-pin terminal is a dedicated cold junction compensated k-type thermocouple input.
The 3-pin terminal can accept up to 2 analog, 0V to 4.8V signals.
Either of these two analog inputs can be used to log wide band O2 AFR data.