PDA

View Full Version : Maf tunning


nchristian
December 3rd, 2009, 03:30 PM
I have beening reading up on tuneing the maf in the tut.I have my auto ve completed. So what do i need to do to calibrate the maf. I have a LM-1 that im using. Do i enable the stft and ltft. or closed loop maf tuneing or open loop.
what filters to use. thanks for the help
joecar
December 3rd, 2009, 04:02 PM
Same setup as AutoVE (open loop), but with these differences:
- B0120 set to 400,
- MAF enabled,
- use B5001 BEN map to paste/multiply into B5001 MAF table.

You want to do it in open loop because you don't want the trims to correct ahead of you.

More info: showthread.php?t=11346 (http://forum.efilive.com/showthread.php?t=11346)

and there are other threads.
nchristian
December 3rd, 2009, 04:18 PM
do i reenable the c2901 and c2903
hquick
December 3rd, 2009, 05:27 PM
No...not necessary.
5.7ute
December 3rd, 2009, 06:13 PM
No...not necessary.

Typo Howard?
C2901/C2903 should be set back to stock to re enable the maf. Resetting the Mil light in C6003 however is not really necessary.
hquick
December 3rd, 2009, 09:06 PM
Doh..yep. Don't need to re-enable the MIL.
Thanks Mick.