Chicago Z06
December 9th, 2009, 10:57 AM
Guys, i have been using EFI Live for a while for my Z06 but i jsut upgraded to the V2 for my LMM. upon initial installation and reading the PCM i got a notification before download about a potential corrupt calibration file, but i could continue and still upload a config to the PCM.. so i downloaded the stock tune and modified it for no EGR and DPF delete. I went to upload the file and went through the licescing of the PCM to the Flashscan etc and i get the no calibration file again, clicked ok and started the upload. well the upload didn't take so i went back through all the steps and even downloaded the stock tune again. but now i get "PCM in unknown state" and i can't download or upload to the PCM... I have the data stream from the Flashscan below.. one thing i saw was that the "unregistered interface" not sure about that as i know everything is registered based upon the license i received with the V2... am i missing something simple here?? the good thing is the truck still runs!! any help is greatly appreciated!!
15:45:16.698: Scanning for EFILive FlashScan V2 USB
15:45:19.089: Scanning for EFILive FlashScan V2 HAPI
15:45:19.308: Interface firmware version: 2.6.12
15:45:19.339: Interface firmware model: FSV2
15:45:19.370: Interface firmware version: 2.6.12
15:45:19.386: Interface firmware date: Jun 07, 2009
15:45:19.401: FlashScan serial number: 003782281100
15:45:19.433: FlashScan license number: 003782281100
15:45:19.448: Disconnecting ...
15:45:20.120: CAN-VPW Bridge Deactivated
15:45:20.120: Disconnected
15:45:20.745: Scanning for EFILive FlashScan V2 USB
15:45:23.261: Scanning for EFILive FlashScan V2 HAPI
15:45:23.464: Interface firmware version: 2.6.12
15:45:23.495: CAN-VPW Bridge Activated
15:45:23.511: Current protocol set to: "ISO 15765 CAN"
15:45:24.808: Current protocol: No Protocol
15:45:24.839: Interface firmware model: lðg4¥zÌ
15:45:24.870: Interface firmware version: 240.24.103
15:45:24.886: Interface firmware date: Jan 01, 2000
15:45:24.901: FlashScan serial number: 00lðg4\½I
15:45:24.917: FlashScan license number: 00lðg4µjI
15:45:24.933: Error: Unregistered interface, some features have been disabled
15:45:24.995: Current protocol: No Protocol
15:45:24.995: Getting status...
15:45:25.026: Status: OK.
15:45:25.964: Preparing ECM for reflash...
15:45:25.964: ECM may not be secured - did not reply to seed request
15:45:25.964: Initializing ECM...
15:45:29.589: Request GM operating system...
15:45:29.620: GM operating system: 12628594
15:45:30.526: Request serial number...
15:45:32.167: Serial number: 864909211750
15:45:42.245: ECM is in an unknown state.
15:45:44.370: Clear emisison related DTCs...
15:45:44.401: Clear DTCs for all modules...
15:45:45.542: Interface firmware version: 2.6.12
15:45:47.261: Disconnecting ...
15:45:47.917: CAN-VPW Bridge Deactivated
15:45:47.933: Disconnected
15:45:47.933: Data transfer was interrupted.
15:45:51.573: Done!
15:45:16.698: Scanning for EFILive FlashScan V2 USB
15:45:19.089: Scanning for EFILive FlashScan V2 HAPI
15:45:19.308: Interface firmware version: 2.6.12
15:45:19.339: Interface firmware model: FSV2
15:45:19.370: Interface firmware version: 2.6.12
15:45:19.386: Interface firmware date: Jun 07, 2009
15:45:19.401: FlashScan serial number: 003782281100
15:45:19.433: FlashScan license number: 003782281100
15:45:19.448: Disconnecting ...
15:45:20.120: CAN-VPW Bridge Deactivated
15:45:20.120: Disconnected
15:45:20.745: Scanning for EFILive FlashScan V2 USB
15:45:23.261: Scanning for EFILive FlashScan V2 HAPI
15:45:23.464: Interface firmware version: 2.6.12
15:45:23.495: CAN-VPW Bridge Activated
15:45:23.511: Current protocol set to: "ISO 15765 CAN"
15:45:24.808: Current protocol: No Protocol
15:45:24.839: Interface firmware model: lðg4¥zÌ
15:45:24.870: Interface firmware version: 240.24.103
15:45:24.886: Interface firmware date: Jan 01, 2000
15:45:24.901: FlashScan serial number: 00lðg4\½I
15:45:24.917: FlashScan license number: 00lðg4µjI
15:45:24.933: Error: Unregistered interface, some features have been disabled
15:45:24.995: Current protocol: No Protocol
15:45:24.995: Getting status...
15:45:25.026: Status: OK.
15:45:25.964: Preparing ECM for reflash...
15:45:25.964: ECM may not be secured - did not reply to seed request
15:45:25.964: Initializing ECM...
15:45:29.589: Request GM operating system...
15:45:29.620: GM operating system: 12628594
15:45:30.526: Request serial number...
15:45:32.167: Serial number: 864909211750
15:45:42.245: ECM is in an unknown state.
15:45:44.370: Clear emisison related DTCs...
15:45:44.401: Clear DTCs for all modules...
15:45:45.542: Interface firmware version: 2.6.12
15:45:47.261: Disconnecting ...
15:45:47.917: CAN-VPW Bridge Deactivated
15:45:47.933: Disconnected
15:45:47.933: Data transfer was interrupted.
15:45:51.573: Done!