PDA

View Full Version : Same PCM, different vehicle and years?



m396 #00-011
October 30th, 2005, 04:16 PM
I had a problem with a PCM. I have a backup PCM from a different year. With Commercial version, can I change that pcm to a different vehicle?

The only problem I see is, the needed pcm is an 03 truck, the backup is a 00 car. In the past, I was told pcms followed the 97-98, 99-00, 01 and up type.

Can someone confirm?

Thanks,
Jason

deezel
October 31st, 2005, 03:15 PM
I believe the '03 is different from the 99-02 series. I think the 99-02 have blue and red PCM harness connectors, where the 03 has blue/green. Also, I think the 99-02 had 512k flash size and the 03 has 1024k.

May I ask what happened with your PCM?

m396 #00-011
November 1st, 2005, 03:13 AM
I'll PM you about the PCM, :cry:

I know the memory differences in the years, but didn't know if I was running a custom OS, If I could get around that. I quess it depends on how much memory the 03 PCM program really uses. I quess I could look at the program sizes....

Bad timing, all the knowledge is at SEMA :cry: