LS7 Procharger Help

[xtrememotorsports]

I need some help with tuning a 2009 ZO6 Procharged car any help would be great.

[Mr. P.]

Are you saying you need help purchasing software? Are you saying you need help setting up a wideband? Are you saying you need help reading a tune? Are you saying you need help knowing what tables in the PCM to modify?

What help are you asking for, exactly?

Mr. P.

[joecar]

Here is one piece of the puzzle: showthread.php?t=12693 (http://forum.efilive.com/showthread.php?t=12693)

BTW: welcome to the forum...:cheers:

[xtrememotorsports]

I have been Tuning for 3 years but have never done the new LS7 I need help with what Tabels to change just where do I start.I have software,and a good wideband,and an in house dyno its just that the LS7 is new to me.

[joecar]

Ok, so then you're familiar with doing AutoVE...

The E67/E38 ECM's don't have VE tables, they have VE polynomials...

The EFILive tunetool provides Virtual VE tables which render the VE polynomial factors in a virtual VE surface...

See this thread: showthread.php?t=8961 (http://forum.efilive.com/showthread.php?t=8961)

Post #38 contains the latest VVE tutorial pdf.

Adjusting the VVE's is not the same as doing AutoVE, but it uses some of the same concepts.

Have a read thru the VVE pdf's and see how you go...

By the time you read this, some other people will have added suggestions, comments, expertise.

:)

[Highlander]

Disable VVE, go MAF!
Install a 2.5 bar map sensor from a cobalt and scale it.
Deal with the dynamic section carefully and you are good to go
Install 60# inj.
Otherwise the engine will break.

[odd boy]

Do you have dyno?

Car is too sensitive with timing adv...... what boost r u heading?

AFR shouldn't be more than 11.4 !!!!

LS7 block is too weak and break easy, just be careful.

[robertryan23]

just finished tuning my 07 Z06 ls7 with a 6psi procharger setup. If you need any info or help let me know the specifics.

[joecar]

Hi robertryan23,

Good job :cheers:

Some questions:
- install a MAP sensor...?
- tune VVE...?
- tune MAF (or are you MAF-less)...?
- which injectors do you have...?
- how did you determine timing...?
- did you tune with the aid of a dyno...?