PDA

View Full Version : LS7 Procharger Help



xtrememotorsports
December 30th, 2009, 12:49 PM
I need some help with tuning a 2009 ZO6 Procharged car any help would be great.

Mr. P.
December 30th, 2009, 07:06 PM
Are you saying you need help purchasing software? Are you saying you need help setting up a wideband? Are you saying you need help reading a tune? Are you saying you need help knowing what tables in the PCM to modify?

What help are you asking for, exactly?

Mr. P.

joecar
December 30th, 2009, 08:40 PM
Here is one piece of the puzzle: showthread.php?t=12693 (http://forum.efilive.com/showthread.php?t=12693)

BTW: welcome to the forum...:cheers:

xtrememotorsports
December 30th, 2009, 09:33 PM
I have been Tuning for 3 years but have never done the new LS7 I need help with what Tabels to change just where do I start.I have software,and a good wideband,and an in house dyno its just that the LS7 is new to me.

joecar
December 31st, 2009, 01:56 AM
Ok, so then you're familiar with doing AutoVE...

The E67/E38 ECM's don't have VE tables, they have VE polynomials...

The EFILive tunetool provides Virtual VE tables which render the VE polynomial factors in a virtual VE surface...

See this thread: showthread.php?t=8961 (http://forum.efilive.com/showthread.php?t=8961)

Post #38 contains the latest VVE tutorial pdf.

Adjusting the VVE's is not the same as doing AutoVE, but it uses some of the same concepts.

Have a read thru the VVE pdf's and see how you go...

By the time you read this, some other people will have added suggestions, comments, expertise.

:)

Highlander
January 1st, 2010, 07:48 AM
Disable VVE, go MAF!
Install a 2.5 bar map sensor from a cobalt and scale it.
Deal with the dynamic section carefully and you are good to go
Install 60# inj.
Otherwise the engine will break.

odd boy
March 27th, 2010, 10:05 PM
Do you have dyno?

Car is too sensitive with timing adv...... what boost r u heading?

AFR shouldn't be more than 11.4 !!!!

LS7 block is too weak and break easy, just be careful.

robertryan23
October 7th, 2011, 03:02 PM
just finished tuning my 07 Z06 ls7 with a 6psi procharger setup. If you need any info or help let me know the specifics.

joecar
October 9th, 2011, 10:24 AM
Hi robertryan23,

Good job :cheers:

Some questions:
- install a MAP sensor...?
- tune VVE...?
- tune MAF (or are you MAF-less)...?
- which injectors do you have...?
- how did you determine timing...?
- did you tune with the aid of a dyno...?