Error: $0183 "Invaild Folder"

[8100 Power]

I posted this over on Duramaxdiesels. But since this is more of a hardware issue I figured I would get a better response here.

I went to use the V8 software to start adding PIDS to my V2, etc. I get the error message $0183 "Invalid Folder". I figured the SD card wasn't formatted, so I reformatted via V8 under the "Program" button. Still can't get it to work. I went to EFI Explorer and tried that way and also just going through the File System on the V2 it's self with no luck.

I've used the SD card on BBL with great luck until now, it's a 2 GB.

Thanks in advance.

[Tordne]

The format button you clicked on actually formats the internal config filesystem (Flash memory section) and not the SD card. The SD card is formatted by pressing 'F4->F2->F3->YES' on the FlashScan V2 keypad.

[8100 Power]

I did that. Same error. :confused:

[Tordne]

What is the firmware version on the FlashScan V2? The latest firmware provided with the V8 pre-release (20-Dec) software is 2.06.21.

[8100 Power]

What is the firmware version on the FlashScan V2? The latest firmware provided with the V8 pre-release (20-Dec) software is 2.06.21.

Firmware is 2.06.16. Bootblock is 2.06.02. Looks like a need a update.

[8100 Power]

That was my problem! Thanks!

[Tordne]

Phew, glad it was that simple :-)