need a tune file for a c5 corvette

[louis]

Hello.

I have just bought the new efilive program and I can get the car to start but thats about it. Kind of tough to find any details on how I setup a 3 bar map using main ve and/or bkup main ve.

Is there anyone out there that could set me up with a tune file for a 1999 corvette. I will be glad to pay for this if someone can do immediately. You can also email me at louis@emailicon.net

Thanks for your time and nice forum.

I am running :

F1C Procharger
1400 cfm throttle body
Kooks headers and exhaust.
dart ls1 heads.
stock block
f1c procharger with twin intercoolers.
3bar map
1400 cfm throttle body.
220/225 duration cam with 1.8 rockers.
All roller lifters and rockers.
75 lb high impedience inj.
lingenfelter fuel pump.

[Dirk Diggler]

Here is the 3 bar tutorial and what you have to do to set it up in EFILive

http://www.efilive.com/doc/Tutorials/Custom%20OS%20Upgrade%20Tutorial.pdf


You will also need the 3 bar map sensor and you will have to upgrade your 99 OS to a 2001+ Corvette OS. This in addition to the tutorial will get you where you need to be

[louis]

Hello and thanks for the information.

I have a 3 bar already setup. I did try everything already for the 2/3bar setup and got it running but it was not reading as a 3 bar. kpa was at 105.

When I upgraded the os to new year there was one number off for my OS in the custom selections that did not match my os numbers. The last number was off by one and Im not sure how much that matters but I did get it to run just flooded with gas due to not reading 3bar.

Would you know if this last digit would matter a lot in the custom tune files that are available on that site?

We are in the process of checking the wideband 02 controller to make sure the stock ecu is seeing it.