cool_names_taken
January 24th, 2010, 09:15 PM
Hi Guy's,
I'm building a 57 chev with an LS2 auto from an 05 pontiac GTO. I've done a right hand drive conversion using a donor VX SS commodore dash. Here is my problem, the ECM wont talk to the gauges, namely the check engine light and temperature gauge. I've been told to change the throttle body and use the ecm from the VX but they were sold with the LS1 and dont want to go down that road. I want to keep it fly by wire, and dont want to attach an after market temp gauge, thats not the look I'm going for. any ideas?
I'm building a 57 chev with an LS2 auto from an 05 pontiac GTO. I've done a right hand drive conversion using a donor VX SS commodore dash. Here is my problem, the ECM wont talk to the gauges, namely the check engine light and temperature gauge. I've been told to change the throttle body and use the ecm from the VX but they were sold with the LS1 and dont want to go down that road. I want to keep it fly by wire, and dont want to attach an after market temp gauge, thats not the look I'm going for. any ideas?