P0106 map

[z28ls1818]

im getting this code and its annoying. i keep turning it off and it keeps coming back on. i know the map is good. its a brand new map. this started happening when i reloacated the map to the front of the intake and i changed from a 98 to 02 os with new pcm. dont know how to fix this. any help?

[mr.prick]

Log MAP against {C3003},
it probably needs to be increased in the low TPS% areas for the cam.
If this a 2 BAR MAR sensor you must change {B3601} & {B3602}.

[jfpilla]

This is the MAP Mr P. references. I think you will need to create it.
You can also just raise all the values in C3003 by 10. The 105kPA values will not change and many of the values are in positions that will not be hit.
Lower all the values in C3004 by 2.
Compare your scanned values to the changes you've made.
If all else fails set C6601 to 800 and the test won't run.