PDA

View Full Version : New LMM ECU issues



Truckguy
February 2nd, 2010, 02:15 AM
Hey guys

We just installed an ECU for a customer and I'm having one issue. The "injector calibration incorrect" DTC is set for each injector. I read and tried to apply the info from the sticky regarding this problem, however it will not work for me.

When I attempt to format V2 to internal, it's already set to internal and will not allow me to read the GPM or ECM injector rates. It states an error code "S0281".

Any help is appreciated!!

Regards

GMPX
February 2nd, 2010, 09:33 AM
You mean from THIS (http://forum.efilive.com/showthread.php?t=9795) thread?

Spuco
February 2nd, 2010, 10:23 AM
You mean from THIS (http://forum.efilive.com/showthread.php?t=9795) thread?

I see in your sign. pix you dash says Tuned with EFILive, question is, is there a way to set it up to let you know what DSP setting you are on? And how in general did you get your dash to show that?
Thanks
Stephen

bballer182
February 2nd, 2010, 12:33 PM
I see in your sign. pix you dash says Tuned with EFILive, question is, is there a way to set it up to let you know what DSP setting you are on? Nope, it's been discussed before and that probably involves BCM tuning and communication Which EFI LIve does NOT support. And how in general did you get your dash to show that?
Thanks
Stephen

Not possible with a Bosch ECM. On Delphi controllers (01-05) there is a file called messages.txt which has 8 different messages that can be displayed at different times.

Spuco
February 2nd, 2010, 02:39 PM
Thanks for the info.