Can't get v2 installed on vista 64 bit

[ThunderDan74]

I bought and sucessfully installed my v2 with 7.3 software on a desk top PC windows XP 32 bit back in 2007. Then I got my 64 bit Vista laptop and tried about every thing I could find here to get the right USB drivers going and I can't.

[Tordne]

To load drivers:
- Connect FlashScan to your laptop.
- Right-click on the ‘My Computer’ icon and select the ‘Manage’ option’.
- In the left hand tree select ‘Device Manager’.
- If the drivers are loaded you should see a device with ‘FlashScan’ in the
name under the ‘Universal Serial Bus controllers’ section. If not it will
be listed as an ‘Unknown Device’.
- If it is shown as ‘Unknown Device’ right-click on the ‘Unknown Device’ and
select the ‘Update Driver Software’ option. The drivers are located in the
‘C:\Program Files\EFILive\Drivers\EFILive\Win-2K-XP-Vista’ folder, so choose
the ‘Browse my computer’ or advanced options and select this location to
search. Don't be tempted to navigate the extra folder level into the 'amd64' folder, which I suspect is what you might be doing.

[ThunderDan74]

I was tempted. Story of my life. Thanks for the quick fix.

[ScarabEpic22]

Also, make sure you are running the latest software. 7.3 is really old, we're on 7.5.6 build 104 now. :)

[Tordne]

Good call. Hadn't noticed the 7.3 reference. If you have a FlashScan v2 device your firmware is going to be horribly out of date also. Before updating the firmware please read fully the 'C:\Program Files (x86)\EFILive\V8\Documents\Upgrading FlashScan.pdf' document.

Ha. That is one of the few times I have been able to leave the (x86) reference in the path from my 64 bit system. Usually remove it to avoid any confusion :)

[ZR2_350]

i just got a laptop that has a Windows 7 64-bit OS... I followed the above mentioned directions, but i am still getting a Win32 (needs evaluation) 740 error.

I can see in the device manager that EFI Live FSP is installed and working properly, however i can't even install it because of this error.


HELP..

[ZR2_350]

Disregard above post. I installed it using the download from the site. It worked flawlessly.

[KB3MMX]

I bought and sucessfully installed my v2 with 7.3 software on a desk top PC windows XP 32 bit back in 2007. Then I got my 64 bit Vista laptop and tried about every thing I could find here to get the right USB drivers going and I can't.

WOW!
I'm having trouble getting V7.5 to run on my 64bit Vsta Laptop currently, maybe I should try the version 7.3 and see if it works?

[Tordne]

See these knowledgebase articles to assist you with resolving your issue. BTW, 7.3 is about 100 years old now and completely unsupported.

Software
(http://support.efilive.com/kb_article.php?ref=5404-IJZV-0820)Firmware
(http://support.efilive.com/kb_article.php?ref=7243-SFGL-2949)Drivers (http://support.efilive.com/kb_article.php?ref=9411-UHZV-3143)