PDA

View Full Version : Trying to load another OS, program pcm w current os not available?



timvan
February 27th, 2010, 10:28 AM
Hell,
Im trying to load another dps5 tune in my ecu with another os, I cant fully flash back to the same tune I once had as the program pcm with currently loaded os button is not highlighted or available....why cant I do a full reflash?

acomp917
February 27th, 2010, 10:53 AM
timvan,

I'm new to EFIL and have the same problem unless I have the module connected to the computer BEFORE I start the tune prog. I thought it was because I upgraded a V1 personal.

Just a thought,
S

GAMEOVER
February 27th, 2010, 11:18 AM
timvan,

I'm new to EFIL and have the same problem unless I have the module connected to the computer BEFORE I start the tune prog. I thought it was because I upgraded a V1 personal.

Just a thought,
S

Register your V2 and you don't have to have it plugged in....
Click on HELP in TuneTool, click on register and fill in the info....

ScarabEpic22
February 27th, 2010, 06:46 PM
Yep, has to be registered (with a Commercial V1 or higher, or any V2) and the FlashScan must be plugged in before opening the Tune tool. Then the BIG red arrow will be available, press to full flash.

timvan
February 28th, 2010, 02:09 AM
That was the ticket! Thanks!:)