PDA

View Full Version : P12 Turning off COT



dennisscars
March 9th, 2010, 05:33 PM
Will increasing Min throttle position {B0806} to 200% stop it from going into COT? I had at 200% but would go into what I thought was COT, after first lap and numbers spot on it would go fat about BEN .94 after hard front straight pull. At first I didn't think it was COT because I thought it was off because I previously had set min throttle at 200%. I kept raising the WOT temps by 20% but without max temps indicating above 1065*C I was beginning to think it would be crazy hot.

Also I'm pretty sure it's going over 1065*C but that's all it will register in CATTEMP {GM.CATTEMP}

Any way to know what the fuel adder and timer is or turn it off? Seems it's about 1.06 and until you turn the car off or get off track.

Track only car with no cat.

Chevy366
March 10th, 2010, 04:40 AM
Try maxing 803 , and 805 , 804 min and then the 806 leave at 200 , if that does not work try 806 at zero .

dennisscars
March 10th, 2010, 01:58 PM
Gotcha' I'll give it a try..
:cheers: