Ls240sx
March 24th, 2010, 04:06 AM
The car is a 240sx with 06 GTO swap. Manual. Ecu was from an automatic 06 GTO. 06 Corvette pedal (not that it matters) either way, the OS is different between the automatic and the manual so i figured i would just swap a stock manual complete tune with the automatic, this is what i get..
19:38:46.165: Scanning for EFILive FlashScan V2 USB
19:38:48.659: Scanning for EFILive FlashScan V2 HAPI
19:38:48.849: Interface firmware version: 2.6.4
19:38:48.929: Interface firmware model: FSV2
19:38:48.989: Interface firmware version: 2.6.4
19:38:49.059: Interface firmware date: Oct 22, 2008
19:38:49.119: FlashScan serial number: 003610353337
19:38:49.180: FlashScan license number: 003610353337
19:38:49.260: Disconnecting ...
19:38:49.971: CAN-VPW Bridge Deactived
19:38:50.011: Disconnected
19:38:50.702: Scanning for EFILive FlashScan V2 USB
19:38:53.195: Scanning for EFILive FlashScan V2 HAPI
19:38:53.396: Interface firmware version: 2.6.4
19:38:53.456: CAN-VPW Bridge Actived
19:38:53.526: Current protocol set to: "ISO 15765 CAN"
19:38:57.662: Current protocol: "ISO 15765 CAN"
19:38:57.742: Interface firmware model: FSV2
19:38:57.812: Interface firmware version: 2.6.4
19:38:57.872: Interface firmware date: Oct 22, 2008
19:38:57.932: FlashScan serial number: 003610353337
19:38:57.992: FlashScan license number: 003610353337
19:38:58.132: Getting status...
19:38:58.243: Status: OK.
19:38:59.174: Bootloader version: E40_v1.3F (0878-D519)
19:38:59.214: Preparing ECM for simulated reflash...
19:38:59.294: ECM seed is: $3A65
19:38:59.344: Unlock attempt 1 of 4
19:38:59.504: Initializing ECM...
19:39:00.806: Initializing ECM, step 1 of 4
19:39:00.846: Initializing ECM, step 2 of 4
19:39:02.148: Initializing ECM, step 3 of 4
19:39:04.672: Initializing ECM, step 4 of 4
19:39:05.143: Initializing bootloader...
19:39:05.473: Initializing bootloader, step 1 of 5
19:39:05.854: Initializing bootloader, step 2 of 5
19:39:06.244: Initializing bootloader, step 3 of 5
19:39:06.635: Initializing bootloader, step 4 of 5
19:39:07.125: Initializing bootloader, step 5 of 5
19:39:07.666: ECM ready for reflashing.
19:39:07.806: Request GM operating system...
19:39:07.866: GM operating system: 12596655
19:39:08.658: Request serial number...
19:39:08.788: Serial number: 86M052282NTJ
19:39:10.260: AMD AM29BL802C - 1Mb
19:39:10.771: Simulating ECM flash memory erase. (10 seconds to go...)
19:39:12.032: Simulating ECM flash memory erase. (9 seconds to go...)
19:39:13.294: Simulating ECM flash memory erase. (8 seconds to go...)
19:39:14.556: Simulating ECM flash memory erase. (7 seconds to go...)
19:39:15.818: Simulating ECM flash memory erase. (6 seconds to go...)
19:39:17.080: Simulating ECM flash memory erase. (5 seconds to go...)
19:39:18.341: Simulating ECM flash memory erase. (4 seconds to go...)
19:39:19.603: Simulating ECM flash memory erase. (3 seconds to go...)
19:39:20.865: Simulating ECM flash memory erase. (2 seconds to go...)
19:39:22.127: Simulating ECM flash memory erase. (1 seconds to go...)
19:39:23.168: Note: ECM flash memory has not actually been erased!
19:39:23.469: Simulating reflash of ECM's memory...
19:39:24.290: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:24.340: Retrying previous block...
19:39:25.171: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:25.211: Retrying previous block...
19:39:26.043: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:26.083: Retrying previous block...
19:39:26.914: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:26.964: Retrying previous block...
19:39:27.795: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:27.845: Retrying previous block...
19:39:28.666: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:28.716: Retrying previous block...
19:39:29.548: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:29.588: Retrying previous block...
19:39:29.638: Stopping, please wait...
19:39:29.688: Total time: 00:06
19:39:29.728: Data compression achieved: 4.9%
19:39:29.858: ECM is in an unknown state.
19:39:32.011: Clear emisison related DTCs...
19:39:32.091: Clear DTCs for all modules...
19:39:34.264: Interface firmware version: 2.6.4
19:39:35.636: Disconnecting ...
19:39:36.357: CAN-VPW Bridge Deactived
19:39:36.397: Disconnected
19:39:36.448: Data transfer was interrupted.
19:39:38.080: Done!
Why is this happening? I can just reflash the .bin but not the whole OS. The whole reason i tried reflashing it was because i have 1.5v comming out for the fuel pump trigger wire so i thought maybe VATS was doing all kinds of crazy stuff.
Any help would be great
Thanks
David
19:38:46.165: Scanning for EFILive FlashScan V2 USB
19:38:48.659: Scanning for EFILive FlashScan V2 HAPI
19:38:48.849: Interface firmware version: 2.6.4
19:38:48.929: Interface firmware model: FSV2
19:38:48.989: Interface firmware version: 2.6.4
19:38:49.059: Interface firmware date: Oct 22, 2008
19:38:49.119: FlashScan serial number: 003610353337
19:38:49.180: FlashScan license number: 003610353337
19:38:49.260: Disconnecting ...
19:38:49.971: CAN-VPW Bridge Deactived
19:38:50.011: Disconnected
19:38:50.702: Scanning for EFILive FlashScan V2 USB
19:38:53.195: Scanning for EFILive FlashScan V2 HAPI
19:38:53.396: Interface firmware version: 2.6.4
19:38:53.456: CAN-VPW Bridge Actived
19:38:53.526: Current protocol set to: "ISO 15765 CAN"
19:38:57.662: Current protocol: "ISO 15765 CAN"
19:38:57.742: Interface firmware model: FSV2
19:38:57.812: Interface firmware version: 2.6.4
19:38:57.872: Interface firmware date: Oct 22, 2008
19:38:57.932: FlashScan serial number: 003610353337
19:38:57.992: FlashScan license number: 003610353337
19:38:58.132: Getting status...
19:38:58.243: Status: OK.
19:38:59.174: Bootloader version: E40_v1.3F (0878-D519)
19:38:59.214: Preparing ECM for simulated reflash...
19:38:59.294: ECM seed is: $3A65
19:38:59.344: Unlock attempt 1 of 4
19:38:59.504: Initializing ECM...
19:39:00.806: Initializing ECM, step 1 of 4
19:39:00.846: Initializing ECM, step 2 of 4
19:39:02.148: Initializing ECM, step 3 of 4
19:39:04.672: Initializing ECM, step 4 of 4
19:39:05.143: Initializing bootloader...
19:39:05.473: Initializing bootloader, step 1 of 5
19:39:05.854: Initializing bootloader, step 2 of 5
19:39:06.244: Initializing bootloader, step 3 of 5
19:39:06.635: Initializing bootloader, step 4 of 5
19:39:07.125: Initializing bootloader, step 5 of 5
19:39:07.666: ECM ready for reflashing.
19:39:07.806: Request GM operating system...
19:39:07.866: GM operating system: 12596655
19:39:08.658: Request serial number...
19:39:08.788: Serial number: 86M052282NTJ
19:39:10.260: AMD AM29BL802C - 1Mb
19:39:10.771: Simulating ECM flash memory erase. (10 seconds to go...)
19:39:12.032: Simulating ECM flash memory erase. (9 seconds to go...)
19:39:13.294: Simulating ECM flash memory erase. (8 seconds to go...)
19:39:14.556: Simulating ECM flash memory erase. (7 seconds to go...)
19:39:15.818: Simulating ECM flash memory erase. (6 seconds to go...)
19:39:17.080: Simulating ECM flash memory erase. (5 seconds to go...)
19:39:18.341: Simulating ECM flash memory erase. (4 seconds to go...)
19:39:19.603: Simulating ECM flash memory erase. (3 seconds to go...)
19:39:20.865: Simulating ECM flash memory erase. (2 seconds to go...)
19:39:22.127: Simulating ECM flash memory erase. (1 seconds to go...)
19:39:23.168: Note: ECM flash memory has not actually been erased!
19:39:23.469: Simulating reflash of ECM's memory...
19:39:24.290: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:24.340: Retrying previous block...
19:39:25.171: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:25.211: Retrying previous block...
19:39:26.043: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:26.083: Retrying previous block...
19:39:26.914: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:26.964: Retrying previous block...
19:39:27.795: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:27.845: Retrying previous block...
19:39:28.666: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:28.716: Retrying previous block...
19:39:29.548: Error: Failed. Controller has returned to normal operation, please retry the operation.
19:39:29.588: Retrying previous block...
19:39:29.638: Stopping, please wait...
19:39:29.688: Total time: 00:06
19:39:29.728: Data compression achieved: 4.9%
19:39:29.858: ECM is in an unknown state.
19:39:32.011: Clear emisison related DTCs...
19:39:32.091: Clear DTCs for all modules...
19:39:34.264: Interface firmware version: 2.6.4
19:39:35.636: Disconnecting ...
19:39:36.357: CAN-VPW Bridge Deactived
19:39:36.397: Disconnected
19:39:36.448: Data transfer was interrupted.
19:39:38.080: Done!
Why is this happening? I can just reflash the .bin but not the whole OS. The whole reason i tried reflashing it was because i have 1.5v comming out for the fuel pump trigger wire so i thought maybe VATS was doing all kinds of crazy stuff.
Any help would be great
Thanks
David