PDA

View Full Version : LS3 L92 newbie


68problemchild
April 7th, 2010, 02:02 PM
Hey guys. Restoring an old 68 camaro with the above from a 2007 escalade, LS3 intake, custom cam (Pat G), hooker longtubes, and ordered EFI live which should be here shortly. The software is coming with a base tune (package deal).

In completing the engine I still need a MAF and Wideband 02 sensors. Can you guys recommend one? Brand and or part number?

Better to ask here than on other sites since they impact tuning so much.

Thanks so much.

http://www.flickr.com/photos/41575483@N07/?saved=1
swingtan
April 7th, 2010, 02:15 PM
RE: WB units....

http://forum.efilive.com/showthread.php?t=7977

Looks like a fun project your have there!

Simon
mr.prick
April 7th, 2010, 02:39 PM
A poll needs to be added to that thread. :gossip:
swingtan
April 7th, 2010, 03:00 PM
Agreed ;)
joecar
April 7th, 2010, 05:01 PM
Do you want to start a new poll "Which wideband(s) are you using?"...?

Come up with a list of widebands first.
swingtan
April 7th, 2010, 05:41 PM
http://forum.efilive.com/showthread.php?t=13361
joecar
April 7th, 2010, 06:03 PM
Simon, very good...:cheers:...thanks (I have a couple of other discussions going at the moment).
68problemchild
April 8th, 2010, 02:12 PM
Sorry newbie clarification - this goes to the PCM? or direct to the EFI unit?

Anyone have a part number on LC-1?
swingtan
April 8th, 2010, 03:23 PM
The Wideband controller feeds into the EFILive data logger ( V1 or V2 ). The benifit of the V2 is that it will take a serial data signal for the Wideband which helps in removing analogue off set errors. Some of the WB Controllers have the serial interface built in, others need some "hacking" to get them to work.

Simon.

Thought I might add a video of the V2 usign the serial interface....

http://www.youtube.com/watch?v=WCDSMmRMtTM
68problemchild
April 11th, 2010, 01:42 PM
Is this the part ?

Thanks for all the help!

http://www.summitracing.com/parts/INN-3737/?rtype=10
joecar
April 11th, 2010, 02:11 PM
Is this the part ?

Thanks for all the help!

http://www.summitracing.com/parts/INN-3737/?rtype=10That's the sensor only...

You also need the controller...

The sensor plugs into the controller.

The controller connects to vehicle power/ground, and has a signal wire for feeding FlashScan V1 or V2.
68problemchild
May 3rd, 2010, 12:02 PM
OK got sensor. Thanks All!

Do I even need a MAF?

I have read alot about tuning in SD with no MAF?