BJJ-DURAMAX
April 11th, 2010, 05:49 AM
Shipping out my ecm/tcm to Nick @ DURAMAXTUNER tomorrow. Hopefully will have it back by the end of the week. :mrgreen:
When I go to run the wires for the DSP-5 through the fire wall and into the harness , does anybody have any tips/tricks to ease the installation ?
I read something about making sure the pins are seated all the way , crimps or solders at the correct sizing...?
Where is the optimal placing of the DSP-5 in the cab ?
Saw something about a loose knob on the switch and a hex nut to tighten up...?
After the install is complete , what things should I check for prior to starting her up and going for a drive ?
Should I go through a tranny learning, beginning on level 1 and work my way up to 5 ?
How much driving should I do on each level before I go to the next ?
I saw someone posted putting their tow/haul on for the race setting to set the taps. Will this confuse my tranny when i put her in a tow tune and set the tow/haul when I am actually towing ?
Sorry about the long winded post. Just really need to make sure I nail this with out any f-ups ! Wife is already pissy about me spending the money on this. "...the Banks is just fine...why do you need more...:blahblah:..."!?! So if I jack something up and have to buy a new ecm...I will never hear the end of it !:cussing:
When I go to run the wires for the DSP-5 through the fire wall and into the harness , does anybody have any tips/tricks to ease the installation ?
I read something about making sure the pins are seated all the way , crimps or solders at the correct sizing...?
Where is the optimal placing of the DSP-5 in the cab ?
Saw something about a loose knob on the switch and a hex nut to tighten up...?
After the install is complete , what things should I check for prior to starting her up and going for a drive ?
Should I go through a tranny learning, beginning on level 1 and work my way up to 5 ?
How much driving should I do on each level before I go to the next ?
I saw someone posted putting their tow/haul on for the race setting to set the taps. Will this confuse my tranny when i put her in a tow tune and set the tow/haul when I am actually towing ?
Sorry about the long winded post. Just really need to make sure I nail this with out any f-ups ! Wife is already pissy about me spending the money on this. "...the Banks is just fine...why do you need more...:blahblah:..."!?! So if I jack something up and have to buy a new ecm...I will never hear the end of it !:cussing: