PDA

View Full Version : V1 or V2?



jcbduramax
April 13th, 2010, 02:42 AM
I have the V2 already, and am looking to buy the V1 from a guy, it doesnt come with a license, so do i need one to plug the V1 into my truck? and will the tuning be the same? thank you this is also my first post in the fourms.

mr.prick
April 13th, 2010, 03:15 AM
There are no advantages to the V1 over the V2.
My 2ยข

jcbduramax
April 13th, 2010, 03:16 AM
okay so everything is basically the same? and can you still get extra lic for the V1? thanks!

mr.prick
April 13th, 2010, 03:26 AM
okay so everything is basically the same? and can you still get extra lic for the V1? thanks!

Software wise yes & yes you can still get licenses for the V1.
Comparison Of FlashScan V1 And V2 (http://www.efilive.com/index.php?option=com_content&view=article&id=57&Itemid=110)

jcbduramax
April 13th, 2010, 03:30 AM
Okay thanks, do i need anything else to do real time data logging while im driving the truck can i tune it on the fly?

kbracing96
April 13th, 2010, 03:51 AM
okay so everything is basically the same? and can you still get extra lic for the V1? thanks!

As long as the V1's SN has NOT been used to upgrade to a V2 you can add licenses to it, up to 25.

You do not need to license anything for BBL with either the V1 or the V2. There is no tuning on the fly, you have to stop and turn the vertical off and then to the run potion, but not start to flash in a new cal.

Just wondering... If you already have a V2, why do you want a V1?

jcbduramax
April 13th, 2010, 04:07 AM
Guy is selling it for $200 with everything. So i'm scooping it up.

kbracing96
April 13th, 2010, 04:16 AM
Guy is selling it for $200 with everything. So i'm scooping it up.


Just make sure it hasn't been used for an upgrade to a V2, cuz if it has, all its good for is a scan tool, no tuning. ;)

mr.prick
April 13th, 2010, 04:19 AM
Guy is selling it for $200 with everything. So i'm scooping it up.

That's a good deal, even if it is only good for 97-98 stream.

jcbduramax
April 13th, 2010, 04:32 AM
T do you mean 97-98 stream? I hve a 05 duramax lly

mr.prick
April 13th, 2010, 05:43 AM
I mean as long as it is scan & tune, even if it has been use for a V2 upgrade for the price it is good deal.

jcbduramax
April 13th, 2010, 06:46 AM
Yes it has only been used for v1 and comes with the software and cable.

Tordne
April 13th, 2010, 07:14 AM
jcbduramax,

Get the serial number for the FlashScan V1 and email it to me at support@efilive.com. I can then check if the device has been used to upgrade to FlashScan V1. If it has been used to upgrade no further PCM licenses will be issued to that device. So, it pays to check.

Cheers,

jcbduramax
April 13th, 2010, 08:00 AM
Thanks! I was hoping a tech would chime in, I will get on that pronto

joecar
April 13th, 2010, 01:05 PM
jcbduramax,

do what Tordne said (before you buy the V1):

...
Get the serial number for the FlashScan V1 and email it to me at support@efilive.com.
...

Tordne(Andrew) will check to see if that V1 was ever upgraded for a V2 (i.e. a V2 purchased at a discount by virtue of having previously purchased a V1)

The reason for checking this is as follows:

- if the V1 was upgraded to a V2, then the V1 will not be able to accept anymore licenses.

- if the V1 was never upgraded for a V2, then the V1 will be able to accept new licenses (upto 25 licenses total).


If you are expecting to flash (add licenses) with this V1, then you require that the previous owner of the V1 did not upgrade the V1 for a V2.


If you are not expecting to flash, then it doesn't matter.

Tordne
April 13th, 2010, 01:08 PM
The other things is that if the FlashScan V1 was upgrade to FlashScan V2 that upgrade cannot be done again for the serial number. In short; you wouldn't be able to upgrade to FlashScan V2 using that device.

joecar
April 13th, 2010, 01:12 PM
Andrew, what's the easiest way for him to get the serial number...?


Does he go into the tunetool and do Help->V1 Licensing...?

Or can he just turn it over and read the serial number from the back of it...?

Tordne
April 13th, 2010, 01:17 PM
Yeah 'Help->FlashScan V1 PCM Licensing' in the Tune Tool is the best. Probably have to get the current owner (unless the deal is already done) to do it :)

Tordne
April 13th, 2010, 03:10 PM
Thanks for the email. As per reply that FlashScan V1 has been used to upgrade to FlashScan V2 so the limitations noted above and in the email hold I'm afraid.

ScarabEpic22
April 13th, 2010, 03:25 PM
Bummer, I got trigger happy when I got my V2 upgrade and transferred my free license to my V2. Looking back I should have bought an extra one so it had at least 2 free then upgraded it. Oh well, water under the bridge now right?

Still, $200 for a V1 that can tune unlimited 97/98 cars plus scan everything VPW is a good price.

jcbduramax
April 14th, 2010, 04:41 AM
Yeah but I just want to be able to use my virtual dash boRd, thanks guys for yas help, you saved me $200 and headache