Serial AFR Reads 25.00

[AGRO]

Hey all,
im having a little trouble with bbl, im using a LM2 with a serial connection, the V2 displays the AFR perfectly, and works perfectly when used as a pass through, however when in bbl mode the AFR reads a flat 25.00 with no movement at all.
What could be wrong?

[joecar]

Hi Agro,

Do you have these settings, see attached #1 [with AFR as one of the Data Layout]...?

Do you have the setting Automatically select ALL external digital (serial) PIDs (see attached #2)...?

Are you BBL logging the pid WO2AFR1...?

From the V2 LCD, go Scan Tool->Data Logging->Display WO2, does the AFR display there...?

[mr.prick]

http://www.taquickness.com/taqcables/TAQCables_sLM1.pdf

[AGRO]

Thanks for the reply,
my setting are identical to what you have.
The afr shows fine when Scan Tool->Data Logging->Display WO2
I have manually entered the WO2AFR1 in the pid settings 'CALC' omitted as well.



Hi Agro,

Do you have these settings, see attached #1 [with AFR as one of the Data Layout]...?

Do you have the setting Automatically select ALL external digital (serial) PIDs (see attached #2)...?

Are you BBL logging the pid WO2AFR1...?

From the V2 LCD, go Scan Tool->Data Logging->Display WO2, does the AFR display there...?

[AGRO]

Thanks for that, i did run through that procedure still no go.


http://www.taquickness.com/taqcables/TAQCables_sLM1.pdf

[mr.prick]

Are you logging all the serial PIDs needed?

[AGRO]

Are you logging all the serial PIDs needed?

I'm pretty sure I am
do you mind giving me a list so I can compare?

[mr.prick]

Ext.wo2afr1
ext.wo2eqr1
ext.wo2lam1
ext.wo2st1

[AGRO]

Ext.wo2afr1
ext.wo2eqr1
ext.wo2lam1
ext.wo2st1
I have similar pids
still not working
any other suggestions?

[mr.prick]

And the same settings programmed into the V2 as Joecar's post?
It maybe that the LM-2 is not yet supported. :nixweiss:
Post a log, it could be a bug in the firmware.
There was a firmware that failed to display serial EQ but AFR and Lambda worked.

[joecar]

Agro, try updating to the latest software (builds 114 and 94) and firmware (2.6.34) from here (http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=133).