PDA

View Full Version : WOT Tuning



Slow73
April 30th, 2010, 11:00 AM
Trying to tune my WOT AFR on a race car....im commanding 12.80 and seeing AFRs in the low 13s throughout my run. Is there an formula I can use to figure out how much to richen my VE table to get to my target?

swingtan
April 30th, 2010, 11:21 AM
try here...

http://forum.efilive.com/showthread.php?t=13152

Slow73
April 30th, 2010, 01:04 PM
I didnt read all of the pages as his 1st paragraph mentions tuning via the MAF. Im running OLSD.

joecar
April 30th, 2010, 01:39 PM
Hi Slow73,

BEN = measured_AFR / commanded_AFR

Using your data as an example: BEN = 13.2 / 12.8 = 1.031

You multiply those cells in the VE table by 1.031...

i.e. the cells at the MAP vs RPM where you commanded 12.8 and measured 13.2.

Slow73
April 30th, 2010, 01:44 PM
It is disabled....thanks Joe...ill give that a try.

joecar
April 30th, 2010, 01:47 PM
It is disabled....
I deleted my post about disabling B4206, I thought about it and it's not relevant in this case. :doh2: