PDA

View Full Version : Anyone using EFI Live to control a boost solenoid???



spoolinsteve
May 19th, 2010, 02:59 PM
Hey guys, I am wondering if there is a way to control a boost control solenoid like an AEM/MAC valve or GM solenoid. Is this even possible? If so I am assuming I would have to go to a custom operating system...

Thanks,
Steve

joecar
May 20th, 2010, 02:49 AM
Hi Steve,

No, not possible... the FlashScan device does not have outputs.

A COS will give you boost fuel/timing tables that are used with a 2-bar/3-bar MAP sensor, but no external control.

If the BC solenoid is a GM device then you would have to run the ECM that goes with it, and I am not familiar with this.

spoolinsteve
May 20th, 2010, 03:54 AM
Thanks Joecar! I been searching the forums alot and you are always on top of your game it seems when it comes to helping!

joecar
May 20th, 2010, 03:56 AM
Thanks for the kind words. :)