View Full Version : computer mounted in vehicle?
Devil_Z
May 24th, 2010, 01:06 PM
Anyone made stands or mounts for a lap top in their vehicles? And are there chargers made to charge a laptop with the cig lighter accessory?
BRD-PREY
May 24th, 2010, 01:22 PM
Its a modified Ram Mount with a custom tray I made.
Ed
Devil_Z
May 24th, 2010, 01:29 PM
Its a modified Ram Mount with a custom tray I made.
Ed
You should post up some pics!:cheers:
Chevy366
May 24th, 2010, 03:36 PM
Not a laptop mount , but saw a Guy build one out of some square tubing, did a cell phone holder and some Velcro for the V2 though .
BRD-PREY
May 25th, 2010, 10:50 AM
I made the tray out of sheet aluminum, I panned braked and tig'd it up. The mounting plate from Ram mount was welded on the bottom. I made 2 spring loaded clamps to hold the laptop on the tray. I also contact cemented 1/32 thick rubber sheeting on the outside of the tray and the 4 locating tabs. I knew if I painted it that it would end up all scratched.
The 2 balls are mounted on the floor boards. If you remove the mounts you don't notice them.
The ball style mount allows the V2 to roll forward out of the way if their is a passanger in the seat.
The V2 stays in the car. I just mount the laptop for tuning etc.
http://i689.photobucket.com/albums/vv257/BRD-PREY/Laptopmount.jpg
http://i689.photobucket.com/albums/vv257/BRD-PREY/Overshoulderview.jpg
http://i689.photobucket.com/albums/vv257/BRD-PREY/V2mount.jpg
http://i689.photobucket.com/albums/vv257/BRD-PREY/Bottombracket.jpg
http://i689.photobucket.com/albums/vv257/BRD-PREY/Ramballs.jpg
Wolfie
May 25th, 2010, 11:06 AM
Jotto Desk makes a mount as well.
mistermike
May 26th, 2010, 11:37 PM
Jotto Desk and a small inverter for AC power.
Filmjay
May 28th, 2010, 11:46 AM
Something like this...
http://www.revo-sys.com/revosys_x400_2din_car_pc.php
mr.prick
May 28th, 2010, 09:40 PM
http://i235.photobucket.com/albums/ee259/whitespar/DSC00255.gif?t=1275129584
BRD-PREY
May 30th, 2010, 08:55 AM
Sure blocks alot of your windshield view. I guess its just a pet pevee of mine I can't stand suction cups and stuff blocking my windshield. What is it though? It looks like a real small sony PC. But how is it connected to the V2 there are no wires?
Ed
mr.prick
May 30th, 2010, 12:05 PM
It's a Sony UX280P
The USB is not connected in the pic.
It doesn't block too much IMO and I like to be able to watch AFR without looking away from the road. :)
BRD-PREY
May 30th, 2010, 01:03 PM
It's a Sony UX280P
The USB is not connected in the pic.
It doesn't block too much IMO and I like to be able to watch AFR without looking away from the road. :)
That's why I would love to have a HUD I could put a dashboard like display on and project it on to the wind screen.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.