View Full Version : How do I....
TFZ_Z06
May 24th, 2010, 03:52 PM
I want to add X% at the max point for the MAF table, then smooth it to 0% change at the bottom. What is the best way to do this?
joecar
May 24th, 2010, 06:10 PM
Highlight the cell you want, then in the Adjust box put the number X, then click % button.
Highlight the whole table (click on the column heading "Value"), then click button that has the sine wave with upper/lower lines (see pic).
TFZ_Z06
May 25th, 2010, 01:25 PM
thank you. Now, that I got your attention. :hihi: How do you make the scan log track with the mouse? It seems to get reset time to time.
I'm referencing the white vertical line on Dashboard-B that tracks under the mouse. I used to be able to move the mouse and when I released the mouse I would have a vertical line on the point I stopped on. Then I could use the right/left arrows keys to nav around.
Any ideas?
joecar
May 25th, 2010, 01:34 PM
Press F2.
F2 toggles locking/unlocking the cursor line.
:)
TFZ_Z06
May 25th, 2010, 04:07 PM
:cheers:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.