PDA

View Full Version : WB not found



driver456
May 29th, 2010, 01:01 AM
WB not found.OK what did I miss or what do I have to do to get it to work.Its a PLX...Thanks..................Paul

Chevy366
May 29th, 2010, 01:15 AM
V2 or V1 , analog or digital ?

driver456
May 29th, 2010, 01:20 AM
V2 & analog.

Chevy366
May 29th, 2010, 01:46 AM
Make sure you have the correct PIDs selected like here :http://forum.efilive.com/showthread.php?11694-V2-and-LC-1&p=102366&highlight=#post102366.

driver456
May 29th, 2010, 08:28 AM
I don't have calc ben for some reason,Is that the one I need? I don't really get what you showed me.

joecar
May 29th, 2010, 06:51 PM
Paul, are you using analog or serial connection between LC-1 and V2...?

If you have analog, then you have to select the following pids: CALC.BEN_LC11, CALC.AFR_LC11, EXT.AD1, GM.AFR.

Are you using V2 BBL...? If so then run the S&T software, goto F6:Device Settings, F6:BBL (Logging), checkmark Automatically select all analog pids...

Then Save to file, Program to V2.

What Chevy366 is referring to is that with the serial connection you will get accurate AFR data as this avoids analog connection problems (voltage offsets and poor resolution).

mr.prick
May 29th, 2010, 10:09 PM
V2 & analog.
GM.AFR
EXT.AD1
CALC.AFR_PLX1
CALC.BEN_PLX1

or
GM.AFR
EXT.AD2
CALC.AFR_PLX2
CALC.BEN_PLX2

driver456
May 30th, 2010, 09:38 AM
GM.AFR
EXT.AD1
CALC.AFR_PLX1
CALC.BEN_PLX1

or
GM.AFR
EXT.AD2
CALC.AFR_PLX2
CALC.BEN_PLX2

In pass thru mode the WB works.I have a A/F gauge in the dashboard of my truck and it shows 14.6 and on my laptop when I'm logging it shows 15.2 Is there an adjustment for that? The other thing is in S&T V8 I don't have CALC.AFR_PLX1,CALC.BEN_PLX1.I only have EXT.AD1 or I'm I missing something.

mr.prick
May 30th, 2010, 12:02 PM
In pass thru mode the WB works.I have a A/F gauge in the dashboard of my truck and it shows 14.6 and on my laptop when I'm logging it shows 15.2 Is there an adjustment for that? The other thing is in S&T V8 I don't have CALC.AFR_PLX1,CALC.BEN_PLX1.I only have EXT.AD1 or I'm I missing something.

You add the WB PIDs to the log after you open it.

You may not be able to match the gauge to your stoich AFR. :nixweiss:
Is it adjustable?
How to match wideband output to {B3601} (http://forum.efilive.com/showthread.php?13229-How-to-match-wideband-output-to-B3601)

joecar
May 30th, 2010, 02:59 PM
Like mr.prick said, you add the calc pids when viewing BBL log with scantool.