BBL- Can I add new pids?

[LS1FREEK]

I have an AEM widband and I was wondering if I wold be able to read the AFR on the StandAlone BBL? I have the custom PIDs so it reads correctly when I log with my laptop, but I want to be able to see it on my BB? Does my q? make sense?

[joecar]

Is your AEM connected to the V2 using the serial cable...?

If so, then you can directly read the wideband AFR on V2 as a pid.

Or do you not have the serial connection...?

Which model AEM do you have...?

With BBL, you add in the calc pids after the log has been captured (i.e. the calc pids are not viewable on V2 while logging).

[LS1FREEK]

Nope, no serial connection, I'm using the AD1 ~5v input.. I have the AEM EUGO wideband... Ok, so all I gotta do is log the AD1 input with the BBL and then when I go back and watch it on my laptop, I THEN add my AEM PID?

[joecar]

Nope, no serial connection, I'm using the AD1 ~5v input.. I have the AEM EUGO wideband... Ok, so all I gotta do is log the AD1 input with the BBL and then when I go back and watch it on my laptop, I THEN add my AEM PID?Yes, that is correct.

V2 supports serial connection for AEM UEGO, but I am not familiar with the AEM models/capabilites.