PDA

View Full Version : Dsp5



L31Sleeper
June 27th, 2010, 10:55 AM
With a DSP5 tune, if the switch becomes disconnected will the PCM see 5 volts and go back
to stock ??

GMPX
June 28th, 2010, 01:16 PM
Yes, that's the idea. This is also why we recommend putting the stock tune in the factory calibrations section, not as one of the DSP5 tunes, unless you want the default to be a non stock tune.

L31Sleeper
June 28th, 2010, 01:33 PM
So why have the 25K resistor and not just an open circuit??

L31Sleeper
June 29th, 2010, 09:30 AM
How much Wattage should the resistors be ?

GMPX
June 29th, 2010, 09:43 AM
So why have the 25K resistor and not just an open circuit??
That would work too.


How much Wattage should the resistors be ?
1/4W is fine.

L31Sleeper
June 29th, 2010, 09:58 AM
So 1/8 is too small ?

GMPX
July 8th, 2010, 09:05 AM
Sorry, missed this.
1/8W should also be fine if you are looking at using 0805 type resistor packages, otherwise stick with the higher wattage. It's low current we are dealing with.