PDA

View Full Version : open loop tunning



aaronr
July 8th, 2010, 08:43 PM
For some reason my short fuel trim start working when come to complete stop or at an idle. I'm not turning some thing off. They don't come on when i driving down the road.
Here is copy of my tune and lof file.

WeathermanShawn
July 9th, 2010, 04:11 AM
I take it this is a COS?

aaronr
July 9th, 2010, 04:55 AM
yes it is. "cos3"

joecar
July 9th, 2010, 05:35 AM
Hmmm... curious.

aaronr
July 9th, 2010, 05:50 AM
Any thoughts why this is happing.

WeathermanShawn
July 9th, 2010, 05:53 AM
Well, I don't pretend to be an expert on COS..but it seems like problems like these usually have to do with 1 of 3 things:

1. Commanded AFR (stoich or non-stoich).
2. Trims enabled or disabled
3. How STFT's are being applied. I.E., why at Idle not cruise?

Is this a new occurrence?

aaronr
July 9th, 2010, 06:03 AM
1. set 14.71
2. trim are disable
3 Still tring find out.

BlackGMC
July 9th, 2010, 06:29 AM
It appears B3607 is the issue. It is limiting the commanded AFR at idle, that limit is set at 14.68 which is the same as B3601... IMO that is what is causing the triming at idle only...

WeathermanShawn
July 9th, 2010, 06:47 AM
It appears B3607 is the issue. It is limiting the commanded AFR at idle, that limit is set at 14.68 which is the same as B3601... IMO that is what is causing the triming at idle only...

That sounds very plausible..

joecar
July 9th, 2010, 08:48 AM
+1.