PDA

View Full Version : Lbz



killerbee
July 9th, 2010, 07:36 PM
Has anyone been able to see what was changed for the glo-plug fix, by comparing before/after versions of the GM flash?

Does anyone have a breakdown of the OS's, and what each successive one addressed?

049
624
138
128
698
483

I believe the order is correct?

bballer182
July 10th, 2010, 05:28 AM
I have not looked at all of the tables, but from what i have seen is that the EGR flow tables are dramatically different going from the '06LLY to '06 LBZ OS and if i remember correctly the boost tables are quite a bit different. Between the LBZ OS's the EGR flow rate table are altered in each OS. but i never checked the Glow Plug tables.

killerbee
July 10th, 2010, 05:40 AM
Thank you.

killerbee
July 10th, 2010, 05:47 AM
Has anyone tried, for example, replacing a ...128 os ECM with a ...483 os ECM?

bballer182
July 11th, 2010, 09:13 AM
I have replaced the 6128 with the 6698 on my personal rig and have had no problems. in fact i didn't have any problems with the 6128 just want to update the OS. I intentionally didn't upgrade to the 2483 OS becasue it was rumored that that OS had CVN tracking enabled.

killerbee
July 11th, 2010, 09:22 AM
Thanks.

I guess this kinda messes with my head.

Ross, will any LBZ dsp os work on any LBZ, regardless of the original stock os?

bballer182
July 11th, 2010, 05:25 PM
As long as the operating segments match or are the factory upgraded part #'s