New log after tuning on dyno

[Black'Rado]

Got a dyno tune done and im very happy with the results.
On Motor-325RWHP 320RWTQ
On 75 shot-364RWHP 365RWTQ
Only running 22* timing now
pulls were made in 3rd gear unlocked

Dyno graph of motor pull
http://i123.photobucket.com/albums/o303/87k5boggin/NApull.jpg
graph of nitrous pull
http://i123.photobucket.com/albums/o303/87k5boggin/nitrous.jpg
graph of nitrous pull
http://i123.photobucket.com/albums/o303/87k5boggin/naandnos.jpg

Here is a short log cruising and one WOT pull at the end, tell me what you think.

[WeathermanShawn]

Rado:

Nice..

Refresh our memories on your engine, mod, trans, etc.

So what was your NA AFR?

[Black'Rado]

5.3l
Tsp 220/220 .581/.581 112LSA,
Comp 918 revised springs, tsp pushrods
-UDP intake,
LPP Longtubes,
LS1 E-fans,
Walbro 255,
vette servo, tru cool 40k cooler
-4.11s with detroit tru trac.
Nitrous Outlet big noid wet system with Harris Speed Works plate and Microedge controller-only on 75 shot

AFR on motor is 12.2-12.5

[Black'Rado]

here is another log i took after bumping the timing up some more, i was running pretty conservative on 22* on the dyno. previously i was running 25-26*. I upped it to 23-24* and it felt like it pulled alot more still without any knock. I plan on putting the 100 shot in so im going to leave it at 24*. It was fine at 26* and 75shot so it should be good at 23-24* with the 100. It is pilled really rich, like 10.9-11.2 AFR on the 75 so i only really gain about 40hp from it.

take a look at the log, all looked good to me but id like some more experienced eyes to check it out

Thanks

[WeathermanShawn]

Rado:

I always have a hard time analyzing a run without the wideband hooked up (I know I am beginning to sound like a broken record).

But, having said that..overall your Trims look good, and like you said little to no KR. Your narrowbands oscillate a little different than mine (more jagged), but I think they are switching just fine. Perhaps they were a little slower when your ECT was colder, which is probably normal.

If you are happy with your fueling, I think it looks pretty good. Like I said the 'Gold standard' of a log is Actual AFR vs Commanded. I take it you have the wideband mounted, but not connected to EFILive?

[Black'Rado]

Correct i have the wideband running and on a gauge but i have not got that dang usb to serial adapter to program the output so i can log it. I really need to get that done soon.

Comanded afr is 12.34 and i show on the wideband 12.2-12.5 during wot.

thanks for checking it out