PDA

View Full Version : unsupported ecotec pcm



Gregs
August 4th, 2010, 05:35 AM
A few weeks ago I read a pcm from an ecotec motor and I sent it to support @ efilive as instructed. I know you guys are busy and might never get around to adding support for this car and thats fine but i was just wondering if there might be a time in the future when its supported. Thanks!

slows10
August 4th, 2010, 06:32 AM
I thought all ecotec p12 were supported. Did they say to yuo it was an usupported platform? doh answered my own ? sorry.

Tordne
August 4th, 2010, 07:22 AM
I received the file and forwarded it on the development and it is being worked on. If the calibration is similar to one that has already been mapped then it is a pretty straight forward thing. If (like yours) it is a bit different it just takes a bit longer, and of course needs to be fitted in with all the other development activity.

Post back here at the end of the week if you still haven't received anything from us and I'll see where it is at.

Gregs
August 4th, 2010, 08:25 AM
awesome! thanks guys!

MSURacing
August 4th, 2010, 09:23 AM
I have one as well OS:12593509

I think I sent it off a while ago, but I can send it out again.

joecar
August 4th, 2010, 09:53 AM
Might want to send an email as a reminder (just in case the email spam filter zapped it).

Gregs
August 10th, 2010, 09:24 AM
Any news?

Tordne
August 10th, 2010, 11:00 AM
I have one as well OS:12593509

I think I sent it off a while ago, but I can send it out again.

Sorry, I don't have a record of receiving an email from you. Please resend to support@efilive.com.

Tordne
August 10th, 2010, 11:02 AM
Any news?

I sent off an email for an update a couple of days back. For some reason there seems to be a bunch of these coming out of the wood work; there are about 5 cals that need to be mapped so apologies for the delay...

Gregs
August 11th, 2010, 12:11 PM
oh no problem, it might be a while for me as our city is flooding so bad here. had to evacuate the house this morning it was so bad...so no tuning for me for a while

GAMEOVER
August 11th, 2010, 12:39 PM
Will there ever be Bi-Directional controls for 2002-2005 Ecotec?
2.2ltr...

Gregs
August 24th, 2010, 02:49 PM
thanks guys i got the calz file! one question, do i have to read the vehicle again or is it supposed to open the file i originally read from the car? because it doesn't recognize the file i originally read from the car.

Tordne
August 24th, 2010, 03:15 PM
You should just be able to open the file, no need to re-read. I'll just double check for you that I told you the correct folder....

Tordne
August 24th, 2010, 03:18 PM
Sorry. It has to go in the 'C:\Program Files\EFILive\V7.5\Calibrations\L52' folder.

Gregs
August 24th, 2010, 03:23 PM
awesome it works great now! thanks guys!!