PDA

View Full Version : trouble reading tcm tune out of 2010 lmm with latest software release



kdawg62
August 26th, 2010, 03:46 PM
Downloaded the lastest software that is supposed to have the capablity to read the tcm tune out of the 2009+ trucks. It recognizes the tcm and start to read and then freezes at 34k of 2560k. no error message. wait for a few minutes. one time 10+ minutes and click stop and it reboots tcm.

Truck is a 2010 model.

also set dtc UC101 after

joecar
August 26th, 2010, 04:47 PM
Which version of firmware...?

Tordne
August 26th, 2010, 05:01 PM
When setting up the controllers you are selecting 'A50' and not 'AL6' for the 2009+ TCM? As Joe mentions do make sure you have the latest software and firmware.

- 7.5.6. Build 131: http://download.efilive.com/Software/V7.5/EFILiveV7.5.6.131_Setup.exe
- 8.1.2 Build 112: http://download.efilive.com/Software/V8/EFILiveV8.1.2.112_Setup.exe
- FlashScan V2 firmware 2.06.40 (included in V8 download)

Please see these guides for more details on software and firmware updates:
- Software: http://support.efilive.com/kb_article.php?ref=5404-IJZV-0820
- Firmware: http://support.efilive.com/kb_article.php?ref=7243-SFGL-2949

kdawg62
August 27th, 2010, 02:24 AM
I didn't install the firmware.. got too excited i guess. most likely the problem. Thanks for the respones.