PDA

View Full Version : Needed Traction Control Settings


nm2769
September 12th, 2010, 10:11 AM
Guys I am looking for the stock traction control settings for a 2002 Camaro M6. I am looking to enable the traction control features on a car that did not come equipped from the factory. I searched the file repository and only found cars with ETC & traction control. Unable to find a cable driven file.

Thankx
Nick
Tordne
September 12th, 2010, 12:00 PM
Check the Holden M6 files as I had a 2002 manual that was fitted with traction control?
nm2769
September 12th, 2010, 01:18 PM
Check the Holden M6 files as I had a 2002 manual that was fitted with traction control?

Checked those too, but B6611 is at max and B6612 is at min. same as my settings. I looked at a buddies 2000 Camaro w/TC and B6612 is populated. That makes no sense because this is ETC table and car is cable operated?

Any thoughts?
nm2769
September 15th, 2010, 12:20 AM
Come on guys no one can help me out with some traction control settings?
WeathermanShawn
September 15th, 2010, 01:19 AM
Maybe I am missing something..but I have a 2002 Camaro M6 and use the following Tune from Holden Crazy: (See attachment).

Its has Traction Control, and I use the same settings. Car is 'Cable-operated'. Those settings work perfectly for me.
joecar
September 15th, 2010, 03:25 AM
Yep, the 12212156 F-body file has traction control...

but what do you mean "that did not come equipped from the factory"...? You need the relevant hardware (EBCM/ABS controller, 4 channel wheel sensors, TAC controller, CC controller, and possibly a few other things...)
mr.prick
September 15th, 2010, 06:56 AM
+1
You definitely need all the hardware.

Do you have any Diagnostic Trouble codes?
I've got DTC C0236 (Rear Wheel Speed Signal Circuit Missing) and
the ASR turns off automatically after the engine is started without a MIL.
nm2769
September 15th, 2010, 07:50 AM
Guess it is not doing to work correctly. Car does not have all the equipment. I was trying to set it up like a launch control to help eliminate wheel spin coming out of corners during autocross. It would be nice if a future custom OS would support a feature like this. The car has front wheel speed sensors and a speed sensor on the ring gear(3 channel setup).

Thanks for the response.
BlownSierra
February 23rd, 2011, 09:54 PM
what equipment is needed? My truck came with 4wd and abs but no cruise control. I'd like to enable traction control if possible since I'm 2wd now and it could be useful in the snow. Is it possible that just populating the tables will do the trick?

2002 Sierra LM7 came with 4l60e and 4wd, now 2wd with 4l80e