Octane scaler in custom OS

[Chris81]

By the way it looks, to enable the scaler again like stock I would just need to enable the scaler and set the (A0001) percentage to 50% correct to blend the tables? Anything I need to do with A0002?

I have a car that i'm tuning that I need to turn it back on (after the timing is set) because the guy can't always use 91+ octane.

I'm just trying to reassure myself.. this IS correct right? lol

[GMPX]

By the way it looks, to enable the scaler again like stock I would just need to enable the scaler and set the (A0001) percentage to 50% correct to blend the tables? Anything I need to do with A0002?

I have a car that i'm tuning that I need to turn it back on (after the timing is set) because the guy can't always use 91+ octane.

I'm just trying to reassure myself.. this IS correct right? lol

To restore it to 'factory' operation, meaning the PCM will auto adjust between the high/low table, set like so -
A0000 = Disable
A0001 = Does not matter, any number will be O.K.
A0002 = 100%

Cheers,
Ross

[Chris81]

To restore it to 'factory' operation, meaning the PCM will auto adjust between the high/low table, set like so -
A0000 = Disable
A0001 = Does not matter, any number will be O.K.
A0002 = 100%

Cheers,
Ross

Ok, Thanks!