View Full Version : Octane scaler in custom OS
Chris81
December 9th, 2005, 12:02 PM
By the way it looks, to enable the scaler again like stock I would just need to enable the scaler and set the (A0001) percentage to 50% correct to blend the tables? Anything I need to do with A0002?
I have a car that i'm tuning that I need to turn it back on (after the timing is set) because the guy can't always use 91+ octane.
I'm just trying to reassure myself.. this IS correct right? lol
GMPX
December 9th, 2005, 12:49 PM
By the way it looks, to enable the scaler again like stock I would just need to enable the scaler and set the (A0001) percentage to 50% correct to blend the tables? Anything I need to do with A0002?
I have a car that i'm tuning that I need to turn it back on (after the timing is set) because the guy can't always use 91+ octane.
I'm just trying to reassure myself.. this IS correct right? lol
To restore it to 'factory' operation, meaning the PCM will auto adjust between the high/low table, set like so -
A0000 = Disable
A0001 = Does not matter, any number will be O.K.
A0002 = 100%
Cheers,
Ross
Chris81
December 13th, 2005, 12:45 AM
To restore it to 'factory' operation, meaning the PCM will auto adjust between the high/low table, set like so -
A0000 = Disable
A0001 = Does not matter, any number will be O.K.
A0002 = 100%
Cheers,
Ross
Ok, Thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.