PDA

View Full Version : E39 , E78 ECM tuning almost done



GMPX
September 26th, 2010, 10:26 AM
Hi All,

Progress update time, E39 tuning has been successfully tested on a car this week. We haven't struck any problems at all in tuning this ECM so we anticipate it's public release late this week. As well as the E39, this week on vehicle tuning tests will also commence on the E78 ECM (2011 2500HD L96), we are confident this will go as smooth as the E39 has so expect it's release at the end of this week too.
Reflash times on these ECM's is just under 1 minute, but, for a cal flash it is programming almost 400K.

We have also reconfigured V8 to use a tabbed interface, much like the current Firefox or I.E use (see picture below). So we just need to tidy up a few things before release and before you know it you guys can be tuning these new models.

Cheers,
Ross

E39 Part way through flash:
9081

Flash Complete:
9082

Factory tune, knock anyone??
9083

GAMEOVER
September 26th, 2010, 11:10 AM
Cool...:D
Nice looking attachments!

gmh308
September 26th, 2010, 11:46 PM
Someone has been working hard on the look and feel! :)

nevinsb
September 27th, 2010, 12:38 AM
wow, there's lots of room for improvement in that tune.

GMPX
September 29th, 2010, 08:52 AM
My time with the LF1 is almost done. I have to give it back to my friend today who has been away on business.
One thing is for sure, the factory tune in these cars does not suit the 91 octane fuel in Australia. I will ask him where he buys he's fuel, and don't return there, maybe it's just really bad fuel.
In the end I did a mix of 91 Octane and 98 Octane (about 40 / 60) and on the stock tune the knock was still there but nothing like the first pictures, the picture below shows this.
It still wanted a spark map more like the Cadillac SRX, not only did it go better, knock was almost non existent with the 91 / 98 fuel mix. Next month Holden release these with E85 capability, one of these running E85 would be very nice. Credit to GM, the LF1 is smooth as silk, can't wait for the twin turbo LF3 to arrive.

Cheers,
Ross

9094

GMPX
September 30th, 2010, 04:38 PM
It's all looking good for a weekend release folks.
This will be the first time tuners have full access to the following vehicles:

E39 Vehicle List:
Engine codes: LF1 (3.0L), LFW (3.0L), LAF (2.4L), LHU (2.0L Turbo)
All will carry the SIDI badge.

As used on...
2010/2011 Buick: LaCrosse, Regal (Incl Turbo)
2010/2011 Cadillac: CTS, SRX
2010/2011 Chevrolet: Equinox
2010/2011 GMC: Terrain
2010/2011 Holden: Commodore (Omega and International)

E78 Vehicle List:
Engine codes: L96 (6.0L), LUJ (1.4L Turbo)

As used on...
2011 Chevrolet 2500HD Truck
2011 Chevrolet Cruze Turbo

We are very excited to see how the 2011 Buick Regal Turbo tuning goes.
Keep on eye on the software updates area.

GMPX
October 2nd, 2010, 12:21 AM
Update released HERE (http://forum.efilive.com/showthread.php?14522-V8-Pass-Through-Reading-Flashing-Support-%28pre-release%29)

wayneosan
October 16th, 2010, 11:32 AM
Is that really that much knock on a stock car?

gmh308
October 16th, 2010, 11:39 AM
Credit to GM, the LF1 is smooth as silk, can't wait for the twin turbo LF3 to arrive.

Cheers,
Ross



Ditto...that'll be cool.

GMPX
October 16th, 2010, 07:04 PM
Is that really that much knock on a stock car?
You bet, that was a log from a stock vehicle, but I am going to assume the fuel was not from a reputable supplier, rather a supermarket chain, I doubt Holden would release a cal like that on purpose.

WopOnTour
October 31st, 2010, 09:30 AM
You could add the 2011 Chevrolet Volt to the E78 list as well ;)
WopOnTour

It's all looking good for a weekend release folks.
This will be the first time tuners have full access to the following vehicles:

E39 Vehicle List:
Engine codes: LF1 (3.0L), LFW (3.0L), LAF (2.4L), LHU (2.0L Turbo)
All will carry the SIDI badge.

As used on...
2010/2011 Buick: LaCrosse, Regal (Incl Turbo)
2010/2011 Cadillac: CTS, SRX
2010/2011 Chevrolet: Equinox
2010/2011 GMC: Terrain
2010/2011 Holden: Commodore (Omega and International)

E78 Vehicle List:
Engine codes: L96 (6.0L), LUJ (1.4L Turbo)

As used on...
2011 Chevrolet 2500HD Truck
2011 Chevrolet Cruze Turbo

We are very excited to see how the 2011 Buick Regal Turbo tuning goes.
Keep on eye on the software updates area.

dtsngit
April 25th, 2011, 09:08 AM
I'm working on a E78 2011 GMC 2500. I don't see where I can turn off the dynamic airflow for fueling calculations. Is this possible and if so how? I'm also wondering how to shutdown the displacement on demand feature on the truck?

Mike

GMPX
April 25th, 2011, 01:07 PM
Hi Mike,

The Dynamic Fuel calculation routines on the E78 are different to the E38, however, if you just want to turn it off then we can probably add that function. Same for AFM disable.

dtsngit
April 25th, 2011, 01:19 PM
I had hoped to turn off the Dynamic calculation so I could put the vehicle in MAF only mode for proper scaling. As well I'd like to get rid of the AFM.

Mike



Hi Mike,

The Dynamic Fuel calculation routines on the E78 are different to the E38, however, if you just want to turn it off then we can probably add that function. Same for AFM disable.

Boost
July 15th, 2011, 04:35 AM
I just read and saved an unsupported cal. '12 E78. PM sent :)

VTuner
September 14th, 2011, 11:42 PM
Looking for a few more tables for the E78 ECM: (Listed in order of priority preference).

Cruze 1.4T
Engine Operation - General- Airflow- VE IMTV- Virtual VE 3 bar Forced Induction
Engine Operation - Idle - ETC Throttle area correction
Engine Diagnostics - ETC - ETC predicted airflow, ETC max predicted airflow

Any time to look into adding these?

Cheers,
Brian

GMPX
September 15th, 2011, 02:18 PM
Hi Brian,

All I can do is put them on the to do list, September and October had be set aside to work entirely on Cummins Diesel in preparation for the SEMA and PRI shows (October and November).
I can however say that we already looked at the Virtual VE for the E78, we will need to make some changes to how V7 calculates it (vs the E38) because it's done slightly different. That has been on the cards for that ECM already.

Cheers,
Ross