PDA

View Full Version : Multiple PID sets for single controller



Biggsy
October 19th, 2010, 06:58 PM
Been away for a while, come back and all the BBX stuff is out of BETA Wohoo!:rockon:

Got a question: Using the pass through mode you can save several PID sets for 1 controller, can the same be done with BBL?

The only way I can see, is to rename one of the 'unused' PID menu items to the same controller and create a new PID set for it.
Am I on the right track?

joecar
October 20th, 2010, 03:07 AM
Hi Dave,

Yes, correct, you can:
- edit the existing pidlists (edit name, controller, and edit the pids);
- create new pidlists (edit the unused ones);

you would do this using the Scan&Tune (S&T) software, see here: showthread.php?14351-BBL-PIDs-V2 (http://forum.efilive.com/showthread.php?14351-BBL-PIDs-V2&p=128785#post128785)

first make sure you update your software from here: builds 135 and 119 (http://forum.efilive.com/showthread.php?14608-UPDATE-V8-Pass-Through-Reading-Flashing-Support-%28pre-release%29)

See attached for example of resulting Options.txt file.

Biggsy
October 20th, 2010, 10:49 AM
Cheers Joe, just want to make sure I was on the right track!