PDA

View Full Version : LMM Traction control defueling


killerbee
November 4th, 2010, 02:13 PM
Can't seem to get rid of it. Can be downright uncomfortable, almost like a wheel hop...nasty, very crude algorithm for traction control, and would love to say goodbye to it. Switch on or off doesn't seem to matter.

Has anyone had any luck?
bballer182
November 4th, 2010, 02:26 PM
Is that '09?
killerbee
November 4th, 2010, 02:36 PM
yes
DURAtotheMAX
November 5th, 2010, 03:19 AM
Can't seem to get rid of it. Can be downright uncomfortable, almost like a wheel hop...nasty, very crude algorithm for traction control, and would love to say goodbye to it. Switch on or off doesn't seem to matter.

Has anyone had any luck?

If its still there when you "turn it off", then you arent turning it off the right way/all the way. RTFM.
jstncse
November 5th, 2010, 12:51 PM
You have to hold the switch down until the stabilatrac shuts off, It takes about 3 seconds. If you just toggle the switch it only turns off the traction control. That will allow you to spin the tires in a straight line, but if the truck gets sideways the stabilatrac will try to correct for you.
DURAtotheMAX
November 5th, 2010, 01:05 PM
you have to hold it for 6 seconds to completely disable stabilitrak...it will say "STABILITRAK OFF" in the driver info center.
killerbee
November 5th, 2010, 01:11 PM
You have to hold the switch down until the stabilatrac shuts off, It takes about 3 seconds. If you just toggle the switch it only turns off the traction control. That will allow you to spin the tires in a straight line, but if the truck gets sideways the stabilatrac will try to correct for you.

Thank you. That helps