PDA

View Full Version : reflash issues


SGFastMax
November 13th, 2010, 11:36 AM
ive only had this problem with LB7's so far. sometimes when i just flash the calibration onto the ecm the changes ive made take no affect on the ecm when this happens i perform a complete reflash of OS and cal and the changes take affect. why is this? what does this have to do with reflashing the OS?
GMPX
November 14th, 2010, 09:36 AM
If it's a DSP5 OS then you need to full flash for the changes to take effect.
SGFastMax
November 14th, 2010, 10:01 AM
If it's a DSP5 OS then you need to full flash for the changes to take effect.

im aware that i have to full reflash the first time to apply the new DSP5 OS, but are you saying i have to full reflash every time i make a change to the calibration?
THEFERMANATOR
November 14th, 2010, 05:30 PM
im aware that i have to full reflash the first time to apply the new DSP5 OS, but are you saying i have to full reflash every time i make a change to the calibration?

Yes, this applies to the DSP5 only though.