PDA

View Full Version : Delphi 2Bar map sensor settings Part Number 16235939



The Alchemist
November 14th, 2010, 01:56 PM
After trying to find correct offset info and scalar info for this map sensor I ended up doing it myself using the dyno map sensor and arrived at these numbers.....:secret:

Scalar:202 (defines the "spread" of total measurement)
Offset:7 (simply moves the entire calibration in KPA up or down by this number)

Checked "key-on" equals 101kpa and at idle logged EFILIVE MAP equals Dyno MAP reading.

E38 computor in a VE Holden L98 engine.
Keywords: offset scalar map delphi 16235939 efilive LS3 LS2 LS1 L98 boost supercharger turbocharger

I hope this helps people :)
Please check and verify against a known map measurement device before tuning.

Mike

nevinsb
November 14th, 2010, 02:55 PM
Thanks for posting this info, a lot of people should find it useful.