06 1500 hd 6.0 wont spin tires

[dmaxbowtie]

i have been tuning a friends 06 6.0 and it looks like i have all the torque reduction and abuse managment tables correct, can anyone tell me wich tables i have to change and to what to get this truck to spin tires?

[GAMEOVER]

While stomping on accelerator, an aggressive right or left hand turn will help...:D
My truck is a 1500 with a 6.0 and it will spin the tires only when it wants too...Of course it doesn't help that it has heavy 20" stock wheels & tires...

[Taz]

Take a look in the Traction Control folder of the Engine Calibration - especially B6605 - if TCS is active - will probably be pulling a lot of timing out to reduce torque output.


Regards,
Taz

[dmaxbowtie]

Thanks I'll try it out, and I'm going to have to test it out in the rain to get it to spin I'm thinking ;)

[Big Mike]

Also don't forget the BTM enable and disable RPM's otherwise it will never spin the tires with brakes applied. Should be in torque limiting> parameters. B0401 and B0402 I believe.

[Chevy366]

If I put mine against a tree , its wet out and stomp it it will spin the tires . :-}
No really mine will , (3.73 , 87 octane) but I have a small cam and long tube headers .
1500 HD is a heavy load to get moving , before I got the Yokohama tires it would smoke them till you stopped it (dual stripes , not one side), with the Trans-Go it will shift and never miss a spin .
When it was stock not so much , cam and headers make a huge difference .
Note: Long tubes on a HD are complicated and had a real good Exhaust guy to make them work for me .
I suppose if you tuned for 93 octane , you can get a few more ponies and could get some scratch .

[GAMEOVER]

Maybe an aftermarket Torque converter, 2500 or higher stall speed...