Correct pids for VVE tuning

[68problemchild]

What are the pids for Ben Factor for WB innovative?

I think I found WB 02 AFR.

What PID do you read to make sure your tune has failed the MAF and you don't need to pull the yellow wire?

Thanks so much.

[joecar]

For E38 using wideband serial comms : CALC.WO2AFR1, E38.AFRATIO.DMA, CALC.BEN1_E38.

The MAF is failed if the ECM sees any of these DTC codes: P0101, P0102, P0103.

Also see here: showthread.php?8961-E38-VVE-Setup-Guide (http://forum.efilive.com/showthread.php?8961-E38-VVE-Setup-Guide)