Matt68
January 18th, 2011, 03:22 PM
I'm helping out with a friends camaro trying to clean up his idle. We did a log the other day of mostly idling, but we did do a WOT run.
For the most part, the idle and in gear commanded timing matched close to what is in the commanded cells. When we started going WOT from about 2300-3000RPM the timing was in the 25-33* range. Then there is a dip to 15* then back to about 21* which matches the High Octane table. When the timing is in the 25-33* range, I can not find any commanded timing close to that (HO, LO, or Base Spark). I also checked the ECT and IAT modifer tables and there is 0 correction for these running conditions. Is there a table that I am missing that would be adding this timing?
Next time we do a log I will log the gm.aspark to confirm I am in the high octane table.
I have attached the log and the tune that was loaded in the car.
Thanks,
Matt
97179718
For the most part, the idle and in gear commanded timing matched close to what is in the commanded cells. When we started going WOT from about 2300-3000RPM the timing was in the 25-33* range. Then there is a dip to 15* then back to about 21* which matches the High Octane table. When the timing is in the 25-33* range, I can not find any commanded timing close to that (HO, LO, or Base Spark). I also checked the ECT and IAT modifer tables and there is 0 correction for these running conditions. Is there a table that I am missing that would be adding this timing?
Next time we do a log I will log the gm.aspark to confirm I am in the high octane table.
I have attached the log and the tune that was loaded in the car.
Thanks,
Matt
97179718