PDA

View Full Version : E38 stand alone dyno video



69camaro5speed
January 23rd, 2011, 02:29 AM
E38 ecm with efilive virtual ve tuning sd mode,eficonnection harness,I work at bes racing engine this was a ls3 416 package we did with our cnc heads,cam ect.
This is our dyno set up for doing 58x stuff,I have tested 8 engines with it works fine,little differant then ls1 tuning for sure but thank god for efilive and eficonnection for harness.I was going to mount the gas peddle in console room but this was a harness mike got stuck with so it was oem spec but this idea worked (watch video you will see)
thanks again guys
http://www.youtube.com/watch?v=zsS4cSmptpg

joecar
January 23rd, 2011, 08:50 AM
Runs good, 612HP/571ftlb.

Thanks for posting vid.

69camaro5speed
January 23rd, 2011, 10:33 AM
yeah I should have showed the other screen I pulled it down to 2500 it was like 428 tq at 2500 peak tq was 580s

ScarabEpic22
January 23rd, 2011, 06:10 PM
Nice! I cant wait to build an engine for my TBSS, probably going with a fully built LS3 427 (if I can swing that big safely) n/a then adding a blower setup later (cam swap to a blower cam of course!).

The camera moving made it that much better when you got on the gas!

69camaro5speed
January 24th, 2011, 05:43 AM
Yeah I just got the camera so its the first one I did, not sure If It was moving or auto focus fliping out

minytrker
January 24th, 2011, 02:08 PM
Nice, I love the gas pedal! Thats pretty cool, I am just getting setup on an engine dyno to start tuning on them and testing race motors.