PDA

View Full Version : Can you see and filter out cell hits?



pavetim
January 24th, 2011, 01:11 PM
I think on hp tuners you can do this but was wondering if you can on here. Ok say your logging AFR and you have hit a certain cell 20 times. Ok say you got an afr 14.7 all 20 times, the average is 14.7. Ok now say you hit that cell 14.7, 18 times and then one time at 10:1 and another time at 17:1, the average for this is 14.58. Is there a way to look at a map and see how many times and what the values are for the cellls hit. Cause just hittin those odd ball cells one time throws your measuremnt off so if you could filter them out, would be great.

joecar
January 24th, 2011, 02:33 PM
The scantool map allows you to see the cell counts (click the "n" button), the cell max/min/avg values.

The map filters allow you to include or exclude ranges of values.