DOD & VVT Delete

[GAMEOVER]

Has anyone done this to their L76? I'm trying to find a good detailed write up on whats involved so I can finally put a cam in my truck...:D

[Tordne]

Not sure about VVE cause my L76 doesn't have any cam phasers. if you want to disable DOD (AFM) completely it is a single table change from Yes -> No.

[GAMEOVER]

I meant mechanically,(disabled DOD, with EFI Live when I had 3,500 miles on my truck) I don't want to use an aftermarket DOD/VVT cam, want to go BIG LS2 or LS7 non-DOD non-VVT cam...

[Tordne]

Gotcha!

I disabled DOD about two days after picking up the vehicle from the dealer. Probably had 150kms on it :)

Other than the lifters I'm not sure what else might might need to be changed. I suspect if you doing a cam project the lifters, pushrods, springs etc are all going to get the treatment anyway...

[minytrker]

Here is the parts needed to delete DOD.

Head Bolts
Head Gaskets
Hardened Pushrods
LS7 Lifters
LS2 Lifter guide kit
LS2 Valley Cover
Valve Cover Breather Block-Off
LS7 Camshaft Sprocket
Timing Chain Dampner
PCV Hose for Non-DOD applications
LS2 Lifter guide kit
Exhaust Gaskets
Timing Chain Bolts

[GAMEOVER]

Thanks for posting up list Lorenz...:D

[ChipsByAl]

You will also need the LS2 timing cover and three camshaft sprocket bolts. Get the cam with the three bolts, not the large single bolt.
Al