BBL still not working

[LS2_307]

Sorry guys but I have tried so many times to make this work but just cant get it to happen.

I have spent 4 hrs sitting here going over and over all the advice but still no good.(also tried last year)

Every time i try it it comes back with the error no data (28?) forgotten already
It works fine logging through the laptop.

Also I recorded a log file and when I try to set up a graph it wont let me bring up the Clutch pedal bottom info. Can i get it? its all in the data tab? I want to graph RPM/vehicle Speed/clutch/brake/ etc etc

E38 VE HSV Clubsport with 7l engine

HELP!!!!!!!!

[joecar]

Hi 307,

What version of V8 software do you have installed...?

The Clutch Pressed bit in GM.TSTATE00 is not directly graph-able (with V7 software), you will need to make a calc_pid for it.

Need to define a pid CALC.CLUTCH_PRESSED to be raw({GM.STATE00}) & 1.

[LS2_307]

Hi 307,

What version of V8 software do you have installed...?

The Clutch Pressed bit in GM.TSTATE00 is not directly graph-able (with V7 software), you will need to make a calc_pid for it.

Need to define a pid CALC.CLUTCH_PRESSED to be raw({GM.STATE00}) & 1.

Thanks for your help(newbee)

Bootblock 2.07.01 date Oct14,2010
Firmware 2.07.04 Date Nov 30,2010

just downloaded everything last night to make sure all was the latest.
How do i create the calc_pid(copy what u just did?) where do I put it etc etc.
The main issue is getting BBL working, however it still works fine via the laptop

[Taz]

Hello LS2_307,

Your Bootblock and Firmware appear up to date. Regarding BBx functions - did you also program the Scan (PIDs) and Tune (controllers) into your V2 ? If not, this will be part of your current issues.


Regards,
Taz

[joecar]

See here: showthread.php?14351-BBL-PIDs-V2 (http://forum.efilive.com/showthread.php?14351-BBL-PIDs-V2&p=128785#post128785)