Tuning help!!!

[Juniordiesel]

Tuning my truck for the first time with DSP2 tune. Keep getting a "error: failed. Controller has returned to normal operation, please retry the operation." However above it in green it says "ECM flash memory erased ok. " it keeps cycling through this. PLEASE HELP!!

[Brian1]

Are you Full Flashing the DSP2 tune or just doing a Calibration Flash?

Brian

[Juniordiesel]

I was doing a full flash of the ECM. I got it working. After licensing the cable I thought I had shut down the program but hadn't. Everything flashed and the truck runs great. Now having problems figuring out if my switch works or not.

[Dmaxink]

Enable the pid for dsp2 to make sure it is switching voltages.

[Juniordiesel]

I did and when I go to the "data" tab it changes to saying "yes" to saying "no" at different times. What tab do I see the voltage at?

[Dmaxink]

scantool>pids>system>diesel and just scroll down..look for the units next to the pid that says "V" for Volts

[Juniordiesel]

Nope, don't have the PID that says "DSP2 switch voltage." I have them for the DSP5 but not the two.